LED warning lights, its label varies depending on the status of the laser when used with an interlock system.
Warning Lights
Filters
Number of Display Texts
- 2-way version
Number of Display Texts
1
Warning Lights
Warning lights are used to indicate the operational state of a laser. The status display can be used to significantly reduce interruptions and downtime in laser systems and laboratory workstations. For class 4 laser systems, the installation of an illuminated warning sign at the access indicates the laser environment in accordance with the German Ordinance on the Protection of Employees Against Hazards caused by Artificial Optical Radiation (OStrV) is required by law. An interlock control system can be used for control purposes.
The LED warning lights to indicate status of security restricted areas or spaces are operated at low voltage. With its compact size, it can be well attached to the entrance area at eye level.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
