Standard Micrometer Head (digital), w: 25 mm, 39.2 N, Ø: 18 mm
Optics & Optomechanics
OSE-SHH2-50
Mircrometer Head, t: 50 mm, Standard, Ø: 21 mm
Standard Micrometer Head, w: 50 mm, 39.2 N, Ø: 21 mm
OSE-YbYAG-AR
Yb:YAG Laser Crystal, AR-Coating
Square, AR, Doping (at.): 5% or 10%, A: 5 mm or 10 mm, t: 2 - 5 mm
OSE-YbYAG-BR
Yb:YAG Laser Crystal, Brewster Cut
Square, BR, Doping (at.): 5% or 10%, A: 5 mm or 10 mm, t: 2 - 5 mm
OSE-PBS-C
Plate Polarizing Beamsplitters
Polarizing plate beamsplitters are plates that have a polarizing coating. These transmit p-polarization and reflect s-polarization because the incoming monochromatic beam is at the Brewster angle.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
