Optics & Optomechanics
SCT-300CD
SCT-300CD Rotating Optical Chopper
A complete optical chopper system with frequency display includes: SCT-300CD Control Unit, SCT-300H Chopping Head, SCT-300I Interconnecting Cable, SCT-300D Set of Chopping Discs and IEC mains lead
SCT-300C-OEM
SCT-300C-OEM Rotating Optical Chopper
A complete optical chopper system which includes: SCT-300C-OEM PCB Drivel Board, SCT-300H Chopper Head, SCT-300I Interconnecting Cable and a single Chopping Disc which can be selected from 2, 5, 10 or 30 slots
A complete optical chopper system with frequency display includes: SCT-310 CDU Unit. SCT-310H Chopping head, SCT-300P Blade Protector, SCT-301 Interconnecting Cable, a single shopping disc and IEX mains lead.
A complete optical chopper system with frequency display includes: SCT-340DCU Control Unit, SCT-340H Chopping Head, SCT-340I Interconnecting Cable, a single 200 mm chopping disc and IEC mains lead
A complete optical chopper system with frequency display includes: SCT-350CDU Control Unit, SCT-350H Chopping Head, SCT-350I Interconnecting Cable, 2, 4, 10 and 40 slot 30 mm chopping discs and IEC mains lead
SCT-360H chopping head, SCT-360C-OEM drive board, SCT-360I interconnecting lead ( 1 m in length) and 2 x SCT350D discs
OSE-CCB
Corner Cube Prisms
Corner cubes have the property that light incident on the prism face is deflected 180 degrees regardless of its angle of incidence.
OSE-CPC-14.24C29.02-P
Parabolic Lens
The internal reflection type parabolic lens is an optical element that can collect light on the emitting end surface when incident light from different directions is reflected from the streamlined side surface.
OSE-DOP
Dove Prisms
Dove prisms have the useful property of completely inverting an image by 180 degrees.
BK7 equilateral prisms are commonly used for splitting light into its different colors.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
