The JDSU Q Series lasers are Q-switched diode-pumped UV and green lasers which are used for high-pulse-energy processing of materials such as ceramics, high-repetition-rate processing of materials such as sapphire or silicon.
Lasers
Filters
Laser type
- Solid-state lasers
Wavelength (nm)
Wavelength (nm)
1
Lasers
The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
The Q-Switched Series breakthrough technology enables optimum performance with the lowest power consumption available.
The DIADEM lasers are very compact, high-energy, ultrafast lasers for demanding applications in micro material processing and optogenetics.
The SIRIUS series lasers produce high energy at ps pulses in a compact and rugged format.
The ALTAIR series ultrafast lasers produce high average power at ultra short pulses in a compact and robust format.
The ANTARES series picosecond lasers deliver high average power with picosecond pulses and high repetition rates in a compact and rugged format.
The ALCOR series ultrafast lasers produce high average power with ultrashort femtosecond pulses at 920 nm or 1064 nm.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
