The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
Lasers
Filters
Laser type
- Diode lasers - Laser diodes
Wavelength (nm)
Wavelength (nm)
1
Lasers
The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
CNI-HighPower-Fiber-Diode
High Power Fiber Coupled Diode Lasers
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
JDP-IDL-series
JDSU Direct-Diode laser
JDSU direct-diode laser products provide up to 180 watts output at 940 nm with 600 µm fiber delivery
FOL-GS-xxx
G-Stack Laser Diode Bar Passive Cooled
The FOL-GS-xxx G-Stack laser diode bars have 100 to 250 W power.
The highest power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
CNI-Diode-Laser
Diode Lasers Economy
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
Wavelength stabilized OEM Laser Module from Innovative Photonics Solution features high output power with narrow spectral bandwidth ideal for OEM applications.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
