The OCA-1000 is a multi-channel optical component analyzer capable of performing simultaneous insertion loss (IL), polarization dependent loss (PDL), and optical power (P) measurements on multiple optical paths.
1
Mit der PPMD Quelle -1000 ist es erstmals möglich, deterministisch und mit hoher Auflösung PMD-Werte erster Ordnung bis 180 ps und zweiter Ordnung bis 8100 ps2 zu erzeugen.
This patented device comes in a package as small as 85 × 60 × 10 mm for lasers with coherence lengths less than 10 meters. Devices for coherence lengths in the kilometer range can be custom made in a larger package, with nominal customization fees.
General Photonics phase shifter produces phase shifts up to 15 pi at modulation frequencies from DC to 20 kHz.
GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65π with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz
PMD and PDL are important considerations in many applications, especially high data-rate communications. With the development of high precision test equipment and tighter-tolerance systems, a need has arisen for extremely precise calibration standards.
GPCs’ fixed differential group delay lines eliminate the need for precise
measurement of PM fiber lengths to add defined amounts of first order PMD to a system.
InsideView(TM) is an optical coherence domain reflectometer (OCDR- 1000) designed to obtain space-resolved reflection information inside a fiber optical component, such as a Photonic Integrated Circuit (PIC), for diagnosing quality or design issues.
The OFA-1000, a novel optical frequency analyzer specifically designed to characterize dynamic spectral properties of tunable lasers
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
