GPC's Scrambler module uses a breakthrough all- fiber technology to effectively randomize polarization states. This module is designed to be easily plugged into sensor equipment or measurement instruments with minimal development effort.
Active Components
1
GPC-POS-002
Reset-Free Polarization Tracker - PolaStay
The PolaStay polarization tracker automatically adjusts the state of polarization (SOP) towards a reference SOP, counteracting continuous input SOP variations as fast as 0.9 ms with no resets.
GPCs' high-speed polarization state generator (PSG) module provides the ability to generate 6 states of polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré Sphere in less than 250 ?s, with an impressive repeatability of less than 0.1 degrees.
GPC-POD-xx
High Speed In-line Polarimeter - PolaDetect
GPCs' in-line polarimeter is specially designed for low cost, high-speed polarization characterization without interrupting data traffic. It outputs four voltage signals for calculating both the degree of polarization (DOP) and the state of polarization (SOP) of the light passing through the device in microseconds.
GPC-PSW-002
Polarization Switch - PolaSwitch
GPCs alle Festkörperpolarisationsschalter können die SOP des einfallenden Lichts schnell und wiederholbar um einen festen Winkel, entweder 45 oder 90 Grad, drehen. Sowohl Single-Mode- als auch PM-Faser-Pigtailed-Versionen sind verfügbar.
GPC-PDD-003
Miniature Polarization Diversity Detector
Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement systems, to either obtain polarization related information or minimize polarization sensitivity.
GPC-PDD-001
Polarization Diversity Detector
Simultaneously detecting the powers of two orthogonal polarization components is important for many sensor and measurement applications. A pigtailed polarization beam splitter coupled with two photodetectors can be used for such applications; however, this arrangement is bulky, troublesome to handle, and costly.
GPC-BPD-003
OEM Ausgewogener Detektor
OCT- und Sensorsysteme erfordern hochleistungsfähige ausgewogenePhotodetektoren, um das Signal-Rausch-Verhältnis des Systems zu verbessern. Die BPD-003 wurde speziell für OEM-Anwendungen in solchen Bereichen entwickelt, die auf niedrige Kosten und geringe Größe sowie hohe Leistung ausgelegt sind.
GPC-PBPD-001
Polarization Diverse Balanced Photodetector
OCT and sensor systems require high performance balanced photodetectors to increase system signal to noise ratio. Polarization sensitive OCT and similar applications require separate analysis of the two polarization components of a signal. The PBPD-001 is specially designed for use in such systems.
AOI-DFB-1550-T5-5-1.3-A-x-x-x
1,25 Gb/s 1550 nm DFB TO-Can Laser
Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
