Filters
1


EOP-SH-10-B Boxed Laser Safety Shutter

EOP-SH-10-B

Boxed Laser Safety Shutter: Shutter is boxed with a 0.42“ dia through hole for laser light, allows horizontal and vertical mounting and can be mounted directly to an optical table, 2 million cycles minimum
SCT-300CD Rotating Optical Chopper

SCT-300CD

A complete optical chopper system with frequency display includes: SCT-300CD Control Unit, SCT-300H Chopping Head, SCT-300I Interconnecting Cable, SCT-300D Set of Chopping Discs and IEC mains lead
SCT-300C-OEM  Rotating Optical Chopper

SCT-300C-OEM

A complete optical chopper system which includes: SCT-300C-OEM PCB Drivel Board, SCT-300H Chopper Head, SCT-300I Interconnecting Cable and a single Chopping Disc which can be selected from 2, 5, 10 or 30 slots
SCT-310CD High Speed Rotating Optical Chopper

SCT-310CD

A complete optical chopper system with frequency display includes: SCT-310 CDU Unit. SCT-310H Chopping head, SCT-300P Blade Protector, SCT-301 Interconnecting Cable, a single shopping disc and IEX mains lead.
SCT-340CD Large Rotating Disc Optical Chopper

SCT-340CD

A complete optical chopper system with frequency display includes: SCT-340DCU Control Unit, SCT-340H Chopping Head, SCT-340I Interconnecting Cable, a single 200 mm chopping disc and IEC mains lead
Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.