The VARIABLE FREQUENCY shutter / chopper Model EOP-CH-61-B consists of a blade (vane) mounted on a motor with a limited rotation angle
Filters
!shop!_Stage Size in mm
!shop!_Stage Size in mm
1
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
These special fixed-frequency scanners are very compact, inexpensive and are particularly well suited for small devices and constructions in confined spaces
Standard version: Shutter comes with two studs for mounting and allows horizontal and vertical mounting, 2 million cycles minimum
Boxed Laser Safety Shutter: Shutter is boxed with a 0.42“ dia through hole for laser light, allows horizontal and vertical mounting and can be mounted directly to an optical table, 2 million cycles minimum
Boxed Laser Safety Shutter: Shutter is boxed with a 0.42“ dia through hole for laser light, allows horizontal and vertical mounting and can be mounted directly to an optical table, 50 million cycles minimum
Longlife version: Shutter comes with two studs for mounting and allows horizontal and vertical mounting, 50 million cycles
Shutter with Base Plate: Shutter allows horizontal and vertical mounting and can be mounted directly to an optical table, 2 million cycles minimum
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
