Corner cubes have the property that light incident on the prism face is deflected 180 degrees regardless of its angle of incidence.
Filters
!shop!_Type
!shop!_Material
- B270 equivalent - BK7
!shop!_Material
1
Prisms
The internal reflection type parabolic lens is an optical element that can collect light on the emitting end surface when incident light from different directions is reflected from the streamlined side surface.
Dove prisms have the useful property of completely inverting an image by 180 degrees.
BK7 equilateral prisms are commonly used for splitting light into its different colors.
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
The knife-edge prism is polished on the sharp edges of the rectangular faces and has no chamfers on these edges.
BK7 Light Pipe is an optical element for illuminating a uniform brightness distribution from a light with a non-uniform brightness distribution.
Penta prisms deflect an input beam 270 degrees regardless of the angle of incidence on the first face.
The hollow retroreflector is similar to the corner cube; it reflects the incident light back to its original source.
Rectangular prisms that are not coated can be used in various applications, such as total internal reflection of critical angles and wavelength dispersion.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
