Lab and production measurement technology

Lab and production measurement technology

1


Fiber Phase Shifter

GPC-FPS-002

GPCs’ 2nd generation all fiber phase shifter/modulator provides phase shifts up to 65π with a much lower half-wave voltage (~2 volts as compared with 10-20 volts for the 1st generation phase shifter) at frequencies from DC to 20 kHz
Amonics 1550nm Continuous Wave Amplifier

AMN-AEDFA-CW-1550nm

These standard EDFAs feature high output power, high gain with very low noise, and they can be customized to accommodate a wide range of input signal levels. Customized version are available on request.

DWDM-EDFAs C-Band / L-Band

AMN-AEDFA-x-DWDM-aa-b-cc

Multichannel DWDM C or L-Band EDFA in compact Benchtop or in 19” Rackmount Case for amplifications up to 27 oder 30 dBm output power.  

Back to top

Popular Products

laser2000_dataray_wincamd-lcm_usb3_beam_profiler_mws_3011_crop.png

DAT-WinCamD-LCM

This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.

dat-wincamd-fir-8-14hr.jpg

DAT-WinCamD-IRBB

The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.

Laser Beam Profiler WinCamD-QD-1550

DAT-WinCamD-QD-1550

This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
Laser beam profile measurements for industrial applications

DAT-ILMS

DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.