OSE-PM2-12D-HP
1 mJ - 2 J RS232 Thermal Sensors for Low Power Lasers
- Power Range: 1 mW - 2 W
- Max Intermittent: 2 W
Laser Power Measurement
Filters
Art
Art
1
OSE-PM5-12D-BB
10 mJ - 5 J RS232 Thermal Sensors for Low Power Lasers
- Power Range: 10 mW - 5 W
- Max Intermittent: 7.5 W
OSE-PM10-20D-HP
10 mJ - 15 J RS232 Thermal Sensors for Low Power Lasers
- Power Range: 10 mW - 10 W
- Max Intermittent: 15 W
OSE-PM25-25D-HP
50 mJ - 45 J RS232 Thermal Sensors for Low Power Lasers
- Power Range: 20 mW - 30 W
- Max Intermittent: 45 W
OSE-PM40-25D-HP
50 mJ - 60 J Thermal Sensors for Low Power Lasers
- Power Range: 20 mW - 40 W
- Max Intermittent: 60 W
OSE-PM200-25D-HP
200 mJ - 200 J Thermal Sensors for Medium Power Lasers
- Power Range: 150 mW - 40 W
- Max Intermittent: 200 W
OSE-PL10-VA-25D
50 mJ - 10 J Thermal Sensors for Pulsed Lasers
- Power Range: 2 mW - 10 W
- Max Intermittent: 15 W
OSE-PM10-12D-DF
10 mJ - 15 J Thermal Sensor for High Energy Density Lasers
- Power Range: 10 mW - 10 W
- Max Intermittent: 15 W
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
