A filter that transmits IR wavelengths and absorbs the UV and Visible range.
Filters
Filters
!shop!_Wavelength Range in nm
!shop!_Wavelength Range in nm
1
A filter that transmits a specific wavelength in the UV range and cuts the visible range.
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
A filter that transmits a specific wavelength at green from blu, and cuts off other wavelengths in the visible range.
This product is widely used for absorbing heat from halogen and xenon lights for experiments that need to avoid UV or heat from those lightings.
- Part number: OSE-LA-50S-20
- Part number: OSE-LB-50S-120
The filter can simulate the sensing of a human eye which is similar the silicon pixel detector sensor with a wavelength located at a peak at the NIR range.
- Part number: OSE-CLDF-50S
The principle of the cold mirror is reflecting the visible range light and leave the UV range light to transmit.
Dichroic filter transmit only visible light and reject ultraviolet and infrared light.
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
