The EOP-PLD-1S-110 driver is a boxed driver for 110 V. The driver has front panel controls for amplitude and phase and internal power supplies.
Filters
!shop!_Type
- Blade Protectors - Drivers
1
The EOP-PLD-1S-220 driver is a boxed driver for 220 V. The driver has front panel controls for amplitude and phase and internal power supplies.
The EOP-PLD-1S-PC driver is a printed circuit board level driver which requires an external ± 15 V dc power supply.
The EOP-PLD-2S-110 driver is a boxed driver for 110 V. The driver has front panel controls for amplitude and phase and internal power supplies.
The EOP-PLD-2S-220 driver is a boxed driver for 220 V. The driver has front panel controls for amplitude and phase and internal power supplies
The EOP-PLD-2S-PC driver is a printed circuit board level driver which requires an external ± 15 V DC power supply
Consists of a blade protector suitable for mounting on to a SCT-300H chopping head, six blanking plates, six 12 mm aperture plates and mounting screws.
Consists of a blade protector suitable for mounting on to a SCT-340H chopping head, six blanking plates, six 44 mm aperture plates and mounting screws.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
