These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
Filters
!shop!_Coating
- Al
1
Mirrors
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
