EOP-PLD-1S-110
EOP-PLD-1S-110 Driver
The EOP-PLD-1S-110 driver is a boxed driver for 110 V. The driver has front panel controls for amplitude and phase and internal power supplies.
Scan & Motion Systems
1
EOP-PLD-1S-220
EOP-PLD-1S-220 Driver
The EOP-PLD-1S-220 driver is a boxed driver for 220 V. The driver has front panel controls for amplitude and phase and internal power supplies.
EOP-PLD-1S-PC
EOP-PLD-1S-PC Driver
The EOP-PLD-1S-PC driver is a printed circuit board level driver which requires an external ± 15 V dc power supply.
EOP-PLD-2S-110
EOP-PLD-2S-110 Treiber
The EOP-PLD-2S-110 driver is a boxed driver for 110 V. The driver has front panel controls for amplitude and phase and internal power supplies.
EOP-PLD-2S-220
EOP-PLD-2S-220 Driver
The EOP-PLD-2S-220 driver is a boxed driver for 220 V. The driver has front panel controls for amplitude and phase and internal power supplies
EOP-PLD-2S-PC
EOP-PLD-2S-PC Driver
The EOP-PLD-2S-PC driver is a printed circuit board level driver which requires an external ± 15 V DC power supply
EOP-SC-scanners
Resonant fixed frequency scanner 1D
Fixed-frequency optical scanners and beam deflectors (selectable).
EOP-CH-zz
Tuning Fork Resonant Choppers
The tuning fork chopper is a FIXED FREQUENCY electromechanically driven light chopper
EOP-CH-xx
Optische Shutter/Chopper mit Blade
The VARIABLE FREQUENCY shutter/chopper Model EOP-CH-50, EOP-CH-60, and EOP-CH-61 consists of a blade (vane) mounted on a motor with a limited rotation angle.
EOP-CH-10
EOP-CH-10 Tuning Fork resonant Chopper
The tuning fork chopper is a FIXED FREQUENCY electromechanically driven light chopper
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
