O/E-Transducer with InGaAs-Photodiode,FC

  • tti-tia-525x_03.jpg

Reference number: TTI-TIA-525i-FC

The TIA-525 optical receiver is a convenient, easy to use optical to electrical converter.


Need more info?
Contact our expert.

Fiber Optics Team



The TIA-525 optical receiver is a convenient, easy to use optical to electrical converter. It is extremely useful in a variety of laboratory and field service situations where a quick check of the operation of a laser source, optical transmitter, or the output of a fiber optic communications link is required. The use of surface-mount construction techniques permits the unit to be mounted directly on the vertical input BNC connector of your oscilloscope or digitizer.

Both Silicon and Indium-Gallium-Arsenide detectors are available to cover respectively the 400 to 1000 nm or the 900 to 1700 nm spectral regions. Gains are switch selectable and provide peak responsivity values of approximately 1000 to 100,000 volts per watt. AC coupling between stages may be introduced in order to examine weak high frequency optical signals in the presence of a strong DC optical component. The TIA-525 electrical bandwidth exceeds 125 MHz in the low and medium gain configurations and exceeds 35 MHz in the highest gain configuration.

Parameter: Specification
Detector: InGaAs
wavelength range: 900 - 1700 nm
Transimp. amplification: 1.4 kV/A and 14 kV/A
interstage coupling: AC or DC
Gain select: 1* or 10*
noise: 3pA/ ?Hz
Max. lin. input power: 1.2 mW
max. input without damage: 10 mW
Max. output voltage: 2Vpp/ 50Ohm (4 Vpp no load)
max. Gain: 100.000 V/W
bandwidth: DC to 125MHz @ Gain 1 / DC to 35 MHz @ Gain 10
numerical aperture: 0.29
optical input: FC-connector
electrical output : BNC
Offset voltage: +/1 1V @ max. gain
output impedance: 50 Ohm
power required: internal 9 V battery (30 h) or power supply
dimension: 1.2" x 2.5" x 1.5", 5 oz
temperature range: 0° - 40°C