These lenses, 20 mm in length, are made of a synthetic fused silica material and have a high transmission value in the ultraviolet wavelength range of 180 - 400 nm.
Filters
!shop!_Type
- Focusing Lenses
1
Multi-element Lenses
These lenses with a length of 12 mm are made of a synthetic fused silica material and have a high transmission value in the ultraviolet wavelength range of 180 - 400 nm.
OSE-UDL-NUDL
UV Achromats
These lenses contain elements that have different refractive indices and produce a high degree of correction over a bandwidth of 200 - 400 nm.
Visible spectrum achromats are air-bearing achromatic doublets for visible spectrum lasers or white light applications.
OSE-HFDLSQ
Focusing Lenses for Fiber Lasers, Doublets
High-performance multi-element focusing lenses. Doublets.
OSE-NYDL
YAG Laser Focusing Lenses, Doublets
YAG laser focusing lenses are air-bearing doublets for YAG wavelengths.
Visible spectrum achromats are air-bearing achromatic triplets for visible spectrum lasers or white light applications.
OSE-NYTL
YAG Laser Focusing Lenses, Triplets
YAG laser focusing lenses are air-bearing triplets for YAG wavelengths.
OSE-HFTLSQ
Focusing Lenses for Fiber Lasers, Triplets
High power multi-element focusing lenses. Triplet Lenses.
OSE-PG
Protective Windows
Protective windows can be attached to the focusing lens to minimize damage from laser processing.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
