Filters
!shop!_Type
- Concave Mirror Substrates for Laser - Optical Circle Parallels - Reasonable Optical Flats - Wedged Substrates - Windows for Infrared Laser
!shop!_Type
!shop!_Coating
!shop!_Coating
1
Substrates
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These Optical Parallels are precision substrates polished on both sides with excellent surface quality and flatness. Material: SiO2 for excimer lasers.
These wedged substrates can separate the reflected beam through the front and back surfaces of the substrates by the slight wedge angle. Material: BK7.
These wedged substrates can separate the reflected beam through the front and back surface of the substrates by the slight wedge angle. Material: SiO2.
These wedged substrates can separate the reflected beam through the front and back surface of the substrates by the slight wedge angle. Material: SiO2 for excimer laser.
Anhydrous synthetic fused silica windows for infrared lasers.
These sapphire windows contain no impurities and provide high transmission without any absorption, covering the visible and infrared regions of the spectrum.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
