Filters
!shop!_Type
- Concave Mirror Substrates for Laser - Low scattering substrates - Reasonable Optical Flats - Reasonable Wedge Flats - Wedged Substrates
!shop!_Type
1
Substrates
These low scatter substrates are in high demand for high power laser and X-ray applications.
These low-dispersion substrates are in high demand for high-power laser and X-ray applications.
These low-dispersion substrates are in high demand for high-power laser and X-ray applications.
These low-dispersion substrates are in high demand for high-power laser and X-ray applications.
These low-dispersion substrates are in high demand for high-power laser and X-ray applications.
These low-dispersion substrates are in high demand for high-power laser and X-ray applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These wedged substrates can separate the reflected beam through the front and back surfaces of the substrates by the slight wedge angle. Material: BK7.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
