Mirrors with high surface accuracy are realized by optimizing the conditions of substrate, thickness and coating.
Filters
!shop!_Type
- Laser Line Mirrors - Surface Accuracy Mirrors - Wide Incidence Dielectric Mirrors
!shop!_Type
1
Mirrors
These laser mirrors are designed for laser applications with specific wavelengths, where low wavefront distortion, low scattering and high reflectivity are usually important.
You can use the 0 - 45° wide-angle dielectric mirrors for an optical system to move light back and forth between two mirrors or Michelson interferometers if you want to use a mirror with an angle of incidence of 45° or less.
All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suitable for use with high-power laser systems.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
