OSE-GMMUHP
Frameless Mirror Unit
Frameless mounting is designed to minimize the product footprint and maximize the front surface area of the mirror used.
OSE-GMMUHP
Frameless mounting is designed to minimize the product footprint and maximize the front surface area of the mirror used.
OSE-TFG
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-TFGS
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-FLM
Dieser Spiegel ist so konzipiert, dass er eine geringe Wellenlängendispersion aufweist, die für die Verwendung mit Ultrakurzpulslasern mit 100 Femtosekunden oder weniger geeignet ist.
OSE-FLMHP
This mirror is designed to have a low wavelength dispersion suitable for use with ultrashort pulse lasers of 100 femtoseconds or less.
OSE-TFVM
You can use the 0 - 45° wide-angle dielectric mirrors for an optical system to move light back and forth between two mirrors or Michelson interferometers if you want to use a mirror with an angle of incidence of 45° or less.
OSE-TFMS
Ultra-wideband dielectric mirrors are fabricated using pure dielectric multilayer coatings of alternating high and low index layers.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.