A parabolic mirror is a curved mirror that converts diverging light from one point of the light source into parallel light.
Filters
!shop!_Type
- Ellipsoidal Mirrors - Laser Line Mirrors - Paraboloid Mirrors
!shop!_Type
!shop!_Coating
!shop!_Coating
1
Mirrors
In general, an ellipsoid has two focal points and the light that passes through one focal point also passes through the other focal point after being reflected from the elliptical surface. According to this principle, when a light source is directed to one focal point, it is possible to collect light in the other focal point.
The super mirror is an ultra-high power mirror whose surface reflectance is as close to 1 (100%) as possible to increase the power of the resonator.
These laser mirrors are designed for laser applications with specific wavelengths, where low wavefront distortion, low scattering and high reflectivity are usually important.
All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suitable for use with high-power laser systems.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
