These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
Filters
!shop!_Type
- Aluminum Concave Mirrors - Gold Flat Mirrors - Low Dispersion Mirrors - Ultra Broadband Dielectric Mirrors
!shop!_Type
!shop!_Coating
!shop!_Coating
1
Mirrors
OSE-TCAN
Aluminium Concave Mirror, Al, BK7
These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
OSE-TFG
Gold Flat Mirror, BK7
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-TFGS
Gold Flat Mirror, Silicon crystal
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-FLM
Kurzpulsspiegel
Dieser Spiegel ist so konzipiert, dass er eine geringe Wellenlängendispersion aufweist, die für die Verwendung mit Ultrakurzpulslasern mit 100 Femtosekunden oder weniger geeignet ist.
OSE-FLMHP
Low Dispersion Mirror, High Power
This mirror is designed to have a low wavelength dispersion suitable for use with ultrashort pulse lasers of 100 femtoseconds or less.
OSE-TFMS
Ultra Broadband Dielectric Mirror
Ultra-wideband dielectric mirrors are fabricated using pure dielectric multilayer coatings of alternating high and low index layers.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
