In general, an ellipsoid has two focal points and the light that passes through one focal point also passes through the other focal point after being reflected from the elliptical surface. According to this principle, when a light source is directed to one focal point, it is possible to collect light in the other focal point.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
Dieser Spiegel ist so konzipiert, dass er eine geringe Wellenlängendispersion aufweist, die für die Verwendung mit Ultrakurzpulslasern mit 100 Femtosekunden oder weniger geeignet ist.
This mirror is designed to have a low wavelength dispersion suitable for use with ultrashort pulse lasers of 100 femtoseconds or less.
These laser mirrors are designed for laser applications with specific wavelengths, where low wavefront distortion, low scattering and high reflectivity are usually important.
All dielectric coating designs are much more resistant to laser damage than typical mirrors and are suitable for use with high-power laser systems.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.