GMT-Motorized-Stages
Motorized translation stages from GMT Europe are ideally suited for use in the laser industry, measurement technology, photonics and mechanical engineering for the automation of precise and complex processes.
LTL-Lithium-Six-525
Lithium Six 525 is a frequency doubled green laser that emits femtosecond pulses with high average powers up to 3.5 Watt.
LTL-Lithium-Six-1050
Lithium Six 1050 emits femtosecond pulses with central wavelength at 1050 nm and peak powers up to the megawatt level.
MOD-ML6600
ML6600 series is a laser system which supports up to 8 built-in lasers. ML6600 is controlled by a PC software or directly by analog/digital signals. ML6600 products are available in wavelength range from 400 to 2000 nm.
This exciting new 920 nm femtosecond laser is the next generation of fiber-based technology which is enhancing multiphoton imaging with higher resolution and faster acquisition at significant depth.
CHY-C-1040
The C-1040 is a fixed wavelength femtosecond laser source that delivers ultrashort pulses with high average powers in the near-IR.
The Hummingbird-1030 is a compact laser oscillator
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
