Bandwidth requirements for modern communication infrastructures are accelerating the trend of implementing more and more fiber optic solutions in mobile and stationary networks. Our fiber optic range includes products that are required to build a fiber optical transmission path. These paths are used in all places where data or optical power are meant to be transmitted.
Our product portfolio includes components for private and public networks as well as ones for industrial applications. The focus is on customized solutions and products for use in local area networks (LAN), wide area networks (WAN), in-house and hybrid cabling, and fiber management systems. More specifically, we offer active and passive components, various fibers, different cables, patch cords, and pigtails as well as cable management systems.
Optec's Harsh Environment IP68 connectors are manufactured to the highest quality. They are characterized by ruggedness and reliability in harsh environments such as extreme temperature, humidity, vibration and chemical decomposition gases. They meet the IP-68 requirements for protection against environmental influences such as dust, splash water and contact protection
GigaLight has three product lines, the optical active transceiver, passive components and optical connectivity products.
General Photonics Manual Variable Optical Delay Line VDL-001 generates optical delays up to 600 ps (~18 cm).
Winding a large fiber spool is easy, but making compact, low loss fiber coils requires attention, precision, and skill.
These connectorized couplers are free of fiber pigtails and ready to be inserted in optical systems without the headaches of tinkering with fragile and messy fiber pigtails.
The polarization maintaining filter coupler can either split the light from an input PM fiber between 2 output PM fibers, or can combine light signals from 2 PM input fibers into a single PM output fiber.
This device can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beamsplitter to split light from an input fiber into two output fibers of orthogonal polarization states.
General Photonics’ fiber optic circulators are compact, high-performance light-wave components that separate signals traveling in opposite directions along fibers by transmitting signals from port 1 to port 2 and port 2 to port 3, while blocking signals traveling in the opposite directions.
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
