Float Glass is a glass substrate produced by the float process used in the manufacture of window glass.
Filters
!shop!_Type
- Float glass - Windows for Infrared Laser
!shop!_Type
!shop!_Coating
!shop!_Coating
1
Substrates
Anhydrous synthetic fused silica windows for infrared lasers.
These sapphire windows contain no impurities and provide high transmission without any absorption, covering the visible and infrared regions of the spectrum.
Calcium fluoride windows for ultraviolet lasers.
Zinc-selenium is the most commonly used optical material that enables the transmission of infrared light.
Zinc-selenium is the most commonly used optical material that enables the transmission of infrared light.
Silicon is a monocrystal mainly used in semiconductors and does not absorb in the IR range from 1.2 µm to 6 µm.
Germanium as a monocrystal, which is mainly used in semiconductors, is non-absorbing in IR ranges from 2 µm to 20 µm.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
