These PX optical flats are precision polished on both sides for high accuracy and surface quality.
Filters
!shop!_Type
- Optical Flats - Optical Square Parallels - Reasonable Optical Flats
!shop!_Type
1
These PX optical flats are polished on both sides for high accuracy and surface quality.
These PX optical plates are polished on both sides for high accuracy and surface quality.
These lower cost optical flats have minimal reduction in surface quality and are suitable for most applications.
These are high precision polished substrates where the material change due to the temperature variation is very small. Material: SiO2.
These are high precision polished substrates where the material change due to temperature variation is very small. Material: glass with low expansion.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
