These half mirrors have 4 types of ultra-wideband optics suitable for UV to IR applications.
Filters
!shop!_Type
- Plate Beamsplitters
!shop!_Material
- BK7 - Synthetic fused sillica
!shop!_Material
1
Beam Splitters
These half mirrors have 3 types of ultra-wideband optics for ranges from visibile to NIR, which are used for optical communication applications.
Chrome plate half mirrors are plate beamsplitters coated with chrome on the front side of optical parallels or wedge-shaped substrates.
Plate beam splitters are dielectric multilayer coatings on a parallel plate or wedge substrate. Reflectance : Transmittance: 1:2
Plate-shaped beamsplitters are dielectric multilayer coatings on a parallel plate or wedge-shaped substrate. Reflectance : Transmittance: 1:3
Harmonic separators are used to separate certain YAG harmonics from other harmonics.
A beam sampler behaves like a plate beam splitter, it has the ability to reflect approximately 5.2% of the total beam.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.