Filters
!shop!_Type
- Polarizing Beamsplitter - Quartz Depolarizers - Waveplates
Polarizers
Polarizing plate beamsplitters are plates that have a polarizing coating. These transmit p-polarization and reflect s-polarization because the incoming monochromatic beam is at the Brewster angle.
These Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face.
Broadband Polarizing Beamsplitters provides wide band polarizing.
Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected radiation.
λ/4-retarders convert linearly polarized beams to circular and circular to linear. λ/2-retarders convert polarization direction arbitrarily.
Two-part air-gap waveplates are suitable for use with high energy lasers.
Quartz waveplates are zero-order retardation plates composed of pairs of optically contacted crystalline quartz plates mounted on aluminum frames.
Quartz depolarizers convert linearly polarized input beams to unpolarized beams and are used upstream and downstream of measurement devices that must avoid polarization.
Mica waveplates are zero-order retardation plates designed for a wavelength of 550 nm and effective from 400 - 700 nm.
This optical retardation can be given without the wavelength dependence for all visible regions.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.