These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
Filters
!shop!_Type
!shop!_Type
!shop!_Coating
Mirrors
OSE-TCAN
Aluminium Concave Mirror, Al, BK7
These substrates are mainly used as the primary mirror in a reflecting telescope or as reflection mirror of a collimating optical system light-source.
OSE-TCPA
Paraboloid Mirrors
A parabolic mirror is a curved mirror that converts diverging light from one point of the light source into parallel light.
OSE-TCEA
Ellipsoidal Mirror
In general, an ellipsoid has two focal points and the light that passes through one focal point also passes through the other focal point after being reflected from the elliptical surface. According to this principle, when a light source is directed to one focal point, it is possible to collect light in the other focal point.
OSE-HTFM
Surface Accuracy Mirror
Mirrors with high surface accuracy are realized by optimizing the conditions of substrate, thickness and coating.
OSE-GMMUHP
Frameless Mirror Unit
Frameless mounting is designed to minimize the product footprint and maximize the front surface area of the mirror used.
OSE-TFG
Gold Flat Mirror, BK7
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-TFGS
Gold Flat Mirror, Silicon crystal
Gold (Au) coated reflective mirrors have a high reflectance over a wide infrared range.
OSE-OPBA
High Parallism Aluminium Mirror, BK7
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
OSE-OPSQA
High Parallism Aluminium Mirror, SiO2
This is a vapor-deposited aluminum flat mirror in which the substrate has been polished to a high degree of accuracy and is designed for high reflectivity at any angle of incidence.
This mirror has negative dispersion and can be used for pulse compression in a femtosecond laser system.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
