OSE-HMPQP
Optical Flats, SiO2
These are high precision polished substrates where the material change due to the temperature variation is very small. Material: SiO2.
Optics and Optical Coatings
OSE-HMPZP
Optical Flats, Low-Expansion glass
These are high precision polished substrates where the material change due to temperature variation is very small. Material: glass with low expansion.
OSE-WSQNAHP
Windows with AR-Coating for High Power Laser
Anti-reflective coated windows for high power lasers.
OSE-OPNQ
Water Free SiO2 Windows for IR Laser
Anhydrous synthetic fused silica windows for infrared lasers.
OSE-OPSH
Sapphire Windows for IR Laser
These sapphire windows contain no impurities and provide high transmission without any absorption, covering the visible and infrared regions of the spectrum.
OSE-OPZS
ZnSe Windows for IR Laser, Uncoated
Zinc-selenium is the most commonly used optical material that enables the transmission of infrared light.
Zinc-selenium is the most commonly used optical material that enables the transmission of infrared light.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
