Laser Safety Goggles
Operating with open laser systems of class 3R and above can result in serious damage to the human eye. Therefore, it is important to protect the eyes accordingly by means of suitable laser safety goggles. A norm-certified laser safety goggle fulfills the legal requirements and safeguards the eyes from dangerous laser radiation. The goggle frames can be fitted with a variety of laser safety filters made of polycarbonate or glass. Wavelengths from the deep UV to the far infrared range and laser modes from continuous (cw) to the ultrashort pulse range (fs pulses) are covered. This means that the entire laser safety goggles are certified according to DIN EN 207 (full protection) or DIN EN 208 (protection during alignment work).
Laser safety goggles according to EN 207 with glass filter and a daylight transmittance of 70 %.
UNV-G3002-559G
Laser Safety Goggle 515-532 nm with glass filter
Laser safety goggles according to EN 207 and glass with interference filters and a daylight transmittance of 20%.
UNV-G2005-616
Patients Goggle 775-3000/905-1400/10600 nm
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 62 %.
UNV-G2012-559G
Laser Safety Goggle 9000-11500 nm, Glass Filter - DI LB5
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 92 %.
UNV-G2006-616
Patients Goggle 190-580 nm
Laser safety goggles for patients according to DIN EN 207 with glass filter and a daylight transmission of 14%.
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 40 %.
UNV-G2005-xxx
Laser safety goggle for telecom use
DIN standard certified laser safety goggles with ergonomic brackets for all laser wavelengths commonly used in telecom and a daylight transmission of 62 %.
NIR-Patientenbrille
Patient Eyewear
UNV-G3004-xxx
Laser safety goggle 180-532/1064 nm, Glass Filter
UNV-G3001-559G
Laser Safety Goggle 1025-1100 nm with glass filter
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
