LMT-ICS-9
Interlock control system ICS-9
The interlock control system ICS-9 "Elise" reaches the highest possible performance level PL E when properly installed in accordance with EN ISO 13849-1.
Laser systems of classes 3B and 4 must be constructed in accordance with the German Ordinance on the Protection of Employees Against Hazards caused by Artificial Optical Radiation (OStrV) in such a way that no hazardous laser radiation can penetrate through to the outside. Electronic interlocks on the laser that prevent laser emission within an open laser environment (such as an open door or flap) represent one option for ensuring this protection is provided.
LMT-ICS-9
The interlock control system ICS-9 "Elise" reaches the highest possible performance level PL E when properly installed in accordance with EN ISO 13849-1.
LMT-ICS-KP-12
LMT-AA-04
LMT-WIFE-v2
The Wavelength Indicator For Eyewear (or W.I.F.E.) is designed by Lasermet specifically to indicate the wavelength of each laser in use in the laboratory or laser room.
LMT-ICS-6-SP
The interlock control system ICS-6 "Elise" reaches the highest possible performance level PL E when properly installed in accordance with EN ISO 13849-1.
LMT-Cabin-Laser
LMT-PROTECTION ACTIVE
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.