OSE-NHOTM
UV Filters, OSE-NHOTM
Dichroic filter transmit only visible light and reject ultraviolet and infrared light.
Optics & Optomechanics
OSE-SHPF
Short Pass Filters, OSE-SHPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-LOPF
Longpass Filters, OSE-LOPF
Filters are designed to divide sharply the wavelength color by transmitting the short wavelength and cutting off the long wavelength.
OSE-RSF
Raman Longpass Filters
It is available to cut the excitation laser beam and extracted with high transmittance Raman shifted light on the longer wavelength side with a sharp rise.
OSE-SDM
Sharp Cut Dichroic Mirrors
Divides sharply the color of wavelength by reflecting the short wavelength and transmitting the long wavelength.
OSE-YIF
Broadband Interference Filters
OSE-YIF is a filter that can extract a selected light from the wavelength range.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
