OSE-VPF-C
Bandpass Interference Filter, Circle
- Incident Angle: 0°
- Coating: Dielectric multi-layer coating, Metal coating
- Circle
Optics & Optomechanics
OSE-VPF-S
Bandpass Interference Filter, Square
- Incident Angle: 0°
- Coating: Dielectric multi-layer coating, Metal coating
- Square
OSE-VND
Variable Relfective ND Filters
The OSE-VND are reflcetive ND filters. The reflectivit and the transmittance vary by rotation.
Material: Soda Lime GlassWavelength Range [nm]: 400-700
OSE-SND-12
Reflective Stepping Variable ND Filters
Material: Soda Lime GlassWavelength Range [nm]: 400-700
OSE-MDFPC
Beam Shaping Diffusers
It is fit for fluid observation, used as a light panel and laser markings system.
OSE-DFB-1
Ground Glass Diffusers, BK7
BK 7 Ground glass diffuser has a large area diffusion of and incident light.
OSE-DFSQ-1
Ground Glass Diffusers, SiO2
SiO2 Ground glass diffuser has a large area diffusion of and incident light.
OSE-SCF
Longpass Filters
Longpass filter that cut the short wavelength and let the long wavelength transmit.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
