CoolLED - pE-300lite Light Engine

CoolLED - pE-300lite Lichtquelle
search
  • CoolLED - pE-300lite Lichtquelle
  • CoolLED - pE-300lite Lichtquelle
  • CoolLED - pE-300lite Lichtquelle
  • CoolLED - pE-300lite Lichtquelle
  • CoolLED - pE-300lite Lichtquelle
  • CoolLED - pE-300lite Lichtquelle

Reference number: COL-PE-300LITE

The pE-300lite is a simple white light LED illumination unit. It provides a broad spectrum of illumination, covering the excitation bands of common fluorescent stains.

alt

Need more info?
Contact our expert.

Laser & Light Sources Team
Phone: +49 8153 405-11

Description

The pE-300lite is a simple white light LED illumination unit.  It provides a broad spectrum of illumination, covering the excitation bands of common fluorescent stains.  Operation is by a remote manual control pod with instant on/off and intensity control from 0-100%.

  • Works with everyday fluorophores/stains
  • Affordable through lab consumables budget
  • Broad spectrum - covers UV (DAPI) to Red region (Cy5)
  • Specify for  existing single and multi-band filter sets – no need to buy new filters
  • Direct fit to the microscope in seconds
  • Wide range of microscope adaptors – fits most microscopes
  • No alignment, a once only adjustment
  • Instant on/off  - No shutters required, no warm up or cool down
  • Stable & repeatable – reliable and consistent results
  • Precise intensity control in 1% steps (0-100%) – no ND filters required
  • Excellent uniformity over field of view – fixed and stable, no alignment necessary
  • Long lifetime – expected to exceed 25,000 hours of operating time
  • No bulb replacement or ongoing consumables

Specifications:

DAPI can be excited at either 365nm or 400nm and microscopes typically have a filter set which allows one or other of these wavelengths to be transmitted. To accommodate this, the pE-300lite can be specified in one of two waveband configurations to match with the user’s existing filter sets within the microscope. A microscope which is populated with a number of single band (“SB”) filter sets will typically have DAPI excitation at 365nm and a microscope with multi-band (“MB”) filter(s) has excitation at 400nm. The user can specify the configuration which is appropriate for their microscope.

  • Power requirements: 100-240V a.c. 50/60Hz, 1.4A
  • Power consumption: 2W (standby), 46W (full white intensity)
  • Dimensions:
  • pE-300lite Light Source: 77mm(w) x 186mm(d) x 162(h) - Weight 1.4kg
  • pE-300lite Control Pod: 88mm(w) x 125mm(d) x 37mm(h) - Weight 0.32kg
  • pE-300lite Power Supply: 167mm(w) x 67m(d) x 35mm(h) – Weight 0.62kg
  • pE-Universal Collimator: 44mm(w) x 86mm(d) x 44mm(h) – Weight 0.17kg

Environment & Safety

LED products are more sustainable and energy efficient than conventional illuminators. CoolLED's products have the following benefits:

  • Mercury-free
  • Energy Efficient: 80% less power
  • Long lifetime (25,000 operating hours)
  • No bulb replacements
  • Reduced risk of eye damage
  • Quiet operation
  • No special disposal regulations or issues
  • Warranty: System =24 months extendable by free product registration.  LEDs = 36 months