EOP-ED-220 Driver

Reference number: EOP-ED-220

An enclosed driver for 220V ac operating

Need more info?
Contact our expert.

Optics & Optomechanics Team
Phone: +49 8153 405-11

Description

The EOP-ED-220 driver is configured to operate a broad range of resonant optical scanners and resonant optical choppers at their natural frequency. The driver amplifies the pickup coil signal from the resonant device and returns the amplified signal tot he drive coil. This positive feedback loop is user controlled by an amplitude limiting trim pot. The driver also provides a monitor output square wave reference output signal and is amplitude control adjustable over a range of 5:1 min.

Features and advantages

Amplitude control adjustable 5: 1 min.
Square wave reference output signal
12 V to 15 V input power
220 V operation
Low cost
Dimensions: 3.25“ x 2.12“ x 1.12“)

Specifications

Input power	12 V to 15 V dc, 150 mA Max.
Frequency Range	5 Hz to 20 kHz
Amplitude Control	Adjustable over a range of 5:1 Min.
Monitor Output	A square wave reference output signal at J3 pin 1 (EOP-ED-110 / EOP-ED-220: pin M)
Connectors	J1-Molex (Power): P / N 22-23-2021 J2-Molex (I/O): P / N 22-23-2041 J3-Molex (Monitor): P / N 22-23-2021
Power Supply	An optional wall plug-in power supply is available