The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
Single multiband wave excitation is a revolutionary length innovation in mercury-free microscopy that takes advantage of recent advances in lighting technology. With a much lower environmental impact, this cost-effective modular LED source with single or multi-band wavelength illumination is groundbreaking.
The pulsed picosecond diode lasers of the EPL series are ideal excitation sources for the measurement of fluorescence lifetimes and other time-resolved measurements.
Lithium Six 525 is a frequency doubled green laser that emits femtosecond pulses with high average powers up to 3.5 Watt.
Lithium Six 1050 emits femtosecond pulses with central wavelength at 1050 nm and peak powers up to the megawatt level.
This exciting new 920 nm femtosecond laser is the next generation of fiber-based technology which is enhancing multiphoton imaging with higher resolution and faster acquisition at significant depth.
The C-1040 is a fixed wavelength femtosecond laser source that delivers ultrashort pulses with high average powers in the near-IR.
Preludio is a cutting-edge fiber laser which combines robustness, compactness, and reliability to deliver top of the line performances in a wide range of industrial settings.
The Industrial femtosecond laser powered by Taranis amplification solution.
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
