Half mirrors have a uniform 1:1 ratio of reflection and transmission for both linearly polarized light and normal light source.
Filters
!shop!_Type
!shop!_Type
!shop!_Material
- CaF2 - Synthetic fused silica - Synthetic fused sillica
!shop!_Material
Beam Splitters
These half mirrors have 4 types of ultra-wideband optics suitable for UV to IR applications.
Laser line plate mirrors are plate beamsplitters optically coated on the front side of optical parallels or wedge-shaped substrates with a dielectric multilayer coating.
These thin beam splitters can be inserted into an optical light path without beam shift or chromatic dispersion for any light transmission application.
A variable beam splitter can be used to change the angle of incidence of a laser.
The Polka Dot beam splitter has an aluminum coating of grid dots (polka dots) on the glass substrate.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
