EVT-LR-XXX
Fast industrial line-scan cameras for up to 172 kHz linerate and 10 GigE interface, offering resolutions from 8k to 16k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
Fast industrial line-scan cameras for up to 137 kHz linerate and 10 GigE interface, offering resolution of 8k per line, monochrome, single line or trilinear, based on Gpixel image sensors.
BLV-BVCxxxx
High resolution area-scan camera for industrial SWIR applications up to 1700 nm, resolution 0.08 to 5MP, InGaAs sensor
BLV-BVCxxxx
Prism based area-scan camera with 2 sensors for industrial applications for VIS to NIR, 1.5 MP resolution, CMOS technology.
BLV-BVCxxxx
Line-scan cameras with 1 sensor for industrial applications for SWIR, up to 1024 MP resolution, InGaAs technology.
BLV-BVCxxxx
Line-scan cameras with 2 sensors for industrial applications for SWIR or polarized requirements, up to 4096 Pixel resolution, InGaAs and CMOS technology.
BLV-BVCxxxx
Line-scan cameras with 3 sensors for industrial applications in RGB, up to 3 x 4096 Pixel resolution, CMOS technology.
Line-scan cameras with 4 sensors for industrial applications in RGB plus NIR/SWIR, 4096 Pixel resolution, CMOS and InGaAs technology.
BLV-BVCxxxx
Prism based area-scan camera with 3 sensors for industrial applications for VIS to NIR, up to 5MP resolution, CMOS technology.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
