Superior beam quality due to Powell lens technology. This modular system in the standard dimensions will also meet your individual requirements.
Laser diode modules
Laser diode modules
Special requirements are imposed on laser modules for machine vision. In most cases, line lasers with a homogeneous power distribution are used in measurement technology. Lasers are ideal for quickly measuring contours, geometries, and structures according to the laser light sheet method. Measurement lasers are used in a variety of ways for detecting and measuring defects, presence, diameters, edges, columns, steps, alignment and positioning. Lasers are also the best option for fast and reliable measurement in 2D and 3D image processing.
Superior beam quality due to Powell lens technology. This modular system in compact dimensions will also meet your individual requirements.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
L2S-TLP-Laser
Telecentric Laser Projector from Osela
This particular type of laser provides a telecentric laser line with a constant line length and width for your working range.
Therefore it is intended for high-precision surface inspections e.g. the smallest structures on electronic circuit boards.
Pseudo Random Pattern Projector for your 3D Machine Vision application. Available in the standard or compact dimensions.
L2S-COS-Option
Option: Cosine Correction
Avoid too much reflected light in the middle of your sensor by using the cosine correction. The correction levels can be individually adjusted according your needs.
L2S-Top Hat
Flat Top
Optiques spéciales pour Osela Ligne Laser Systems. L'ensemble des optiques suivantes peuvent être combinés avec presque tous les systèmes laser standard.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
