Aluminum Crossed Roller Guide Motorized Stage

Reference number: OSE-TAMM40-10C

€1,100.70

Tax excluded

Travel in mm

Quantity

Delivery

Need more info?
Contact our expert.

Optics & Optomechanics Team
Phone: +49 8153 405-11

Description

Motorized crossed roller stages offer small footprint, low-profile and high durability.

Travel [mm]: 10

Table Size [mm]: 40x40

Feed Screw: Ball screw diameter Ø4mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 0.33

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 29.4

Moment Stiffness [´´/N*m]: 1.5

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 25/25

Sensor Part Number: Micro photo sensor: GP1S097HCZ (Sharp Corporation) Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: C9863-90215P (28mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, MC-7514PCL

Compatible Controller: GSC-01, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S, PGC-04

Downloads

OSE-TAMM40-10C_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 10

Table Size [mm]: 40x40

Feed Screw: Ball screw diameter Ø4mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 0.33

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 29.4

Moment Stiffness [´´/N*m]: 1.5

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 25/25

Sensor Part Number: Micro photo sensor: GP1S097HCZ (Sharp Corporation) Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: C9863-90215P (28mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, MC-7514PCL

Compatible Controller: GSC-01, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S, PGC-04

Downloads

OSE-TAMM40-10CR_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 15

Table Size [mm]: 60x60

Feed Screw: Ball screw diameter Ø6mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 0.48

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 49

Moment Stiffness [´´/N*m]: 0.5

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 20/20

Sensor Part Number: Micro photo sensor: GP1S097HCZ (Sharp Corporation) Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: C9863-90215P (28mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, MC-7514PCL

Compatible Controller: GSC-01, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S, PGC-04

Downloads

OSE-TAMM60-15C_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 15

Table Size [mm]: 60x60

Feed Screw: Ball screw diameter Ø6mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 0.48

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 49

Moment Stiffness [´´/N*m]: 0.5

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 20/20

Sensor Part Number: Micro photo sensor: GP1S097HCZ (Sharp Corporation) Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: C9863-90215P (28mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-5MA, SG-55M, SG-55MA, SG-514MSC, MC-7514PCL

Compatible Controller: GSC-01, GSC-02, SHOT-702, GIP-101, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S, PGC-04

Downloads

OSE-TAMM60-15CR_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 50

Table Size [mm]: 100x100

Feed Screw: Ball screw diameter Ø8mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 1.9

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 98

Moment Stiffness [´´/N*m]: 0.05

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 20/15

Sensor Part Number: Micro photo sensor: PM-L24 (SUNX Co., Ltd.): Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: PK544NBW (42mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-55M, SG-514MSC, MC-7514PCL

Compatible Controller: SHOT-702, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S

Downloads

OSE-TAMM100-50C_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 50

Table Size [mm]: 100x100

Feed Screw: Ball screw diameter Ø8mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 1.9

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 6

Positional Repeatability[µm]: 1

Load Capacity [N]: 98

Moment Stiffness [´´/N*m]: 0.05

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 20/15

Sensor Part Number: Micro photo sensor: PM-L24 (SUNX Co., Ltd.): Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: PK544NBW (42mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-55M, SG-514MSC, MC-7514PCL

Compatible Controller: SHOT-702, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S

Downloads

OSE-TAMM100-50CR_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]:

100

Table Size [mm]:

100x175

Feed Screw:

Ball screw diameter Ø8mm, 1mm lead

Positioning Slide:

Crossed roller guide

Stage Material:

Aluminium

Finish:

Black anodized

Weight [kg]:

2.9

Resolution/(Full) [µm/pulse]:

Resolution/(Half) [µm/pulse]:

MAX Speed [mm/sec]:

Positioning Accuracy [µm]:

Positional Repeatability[µm]:

Load Capacity [N]:

Moment Stiffness [´´/N*m]:

0.03

Lost Motion [µm]:

Backlash [µm]:

Parallelism [µm]:

Running Parallelism [µm]:

Pitch [´´]/Yaw [´´]:

20/15

Sensor Part Number:

Micro photo sensor: PM-L24 (SUNX Co., Ltd.): Limit Sensor, Origin Sensor

Limit Sensor:

Equipped (NORMAL CLOSE)

Origin Sensor:

Equipped (NORMAL OPEN)

Proximity Origin Sensor:

None

Type:

5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number:

PK544NBW (42mm)

Step Angle:

0.72°

Power Voltage:

DC+5V±24V

Current Consumption:

60mA or lower (20mA or lower per sensor)

Control Output:

NPN open collector output 50mA

Output Logic:

In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver:

SG-5M, SG-55M, SG-514MSC, MC-7514PCL

Compatible Controller:

SHOT-702, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S

Downloads

OSE-TAMM100-100C_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD

Travel [mm]: 100

Table Size [mm]: 100x175

Feed Screw: Ball screw diameter Ø8mm, 1mm lead

Positioning Slide: Crossed roller guide

Stage Material: Aluminium

Finish: Black anodized

Weight [kg]: 2.9

Resolution/(Full) [µm/pulse]: 2

Resolution/(Half) [µm/pulse]: 1

MAX Speed [mm/sec]: 10

Positioning Accuracy [µm]: 10

Positional Repeatability[µm]: 1

Load Capacity [N]: 98

Moment Stiffness [´´/N*m]: 0.03

Lost Motion [µm]: 1

Backlash [µm]: 1

Parallelism [µm]: 30

Running Parallelism [µm]: 10

Pitch [´´]/Yaw [´´]: 20/15

Sensor Part Number: Micro photo sensor: PM-L24 (SUNX Co., Ltd.): Limit Sensor, Origin Sensor

Limit Sensor: Equipped (NORMAL CLOSE)

Origin Sensor: Equipped (NORMAL OPEN)

Proximity Origin Sensor: None

Type: 5-phase stepping motor 0.75A/phase (Oriental Motor Co., Ltd.)

Motor Part Number: PK544NBW (42mm)

Step Angle: 0.72°

Power Voltage: DC+5V±24V

Current Consumption: 60mA or lower (20mA or lower per sensor)

Control Output: NPN open collector output 50mA

Output Logic: In the case of light shielded, output transistor OFF (No conduction): Limit sensor / In the case of light shielded, output transistor ON (Conduction): Origin sensor

Compatible Driver: SG-5M, SG-55M, SG-514MSC, MC-7514PCL

Compatible Controller: SHOT-702, SHOT-302GS, SHOT-304GS, HIT-M*HIT-S

Downloads

OSE-TAMM100-100CR_STP.zip

DOWNLOAD

MotorizedStages.zip

DOWNLOAD