A revolution in material processing: the spatter-free blue diode Laser. Especially for Non-ferrous metals (copper laser welding, gold laser welding).
Lasers
Filters
Laser type
- Diode lasers
Wavelength (nm)
Wavelength (nm)
Lasers
The illumination spectrum of lasers is usually narrower band than conventional light sources resulting in a very coherent light beam. Laser 2000 offers an extensive selection of lasers and other specialized coherent light sources.
Lasers are selected based on wavelength, power, pulsed or cw operation, and other criteria.
The pulsed picosecond diode lasers of the EPL series are ideal excitation sources for the measurement of fluorescence lifetimes and other time-resolved measurements.
The high power system with thermoelectric temperature stabilization for even better signal-to-noise ratios and DB-connector for monitoring/modulation.
Fiber-coupled diode laser with high performance and current and temperature control in a compact housing
Superior beam quality due to Powell lens technology. This modular system in the standard dimensions will also meet your individual requirements.
Superior beam quality due to Powell lens technology. This modular system in compact dimensions will also meet your individual requirements.
The CNI series cw diode lasers are available with nearly all commercial available wavelengths.
This exciting new 920 nm femtosecond laser is the next generation of fiber-based technology which is enhancing multiphoton imaging with higher resolution and faster acquisition at significant depth.
The C-1040 is a fixed wavelength femtosecond laser source that delivers ultrashort pulses with high average powers in the near-IR.
Popular Products
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
