DAT-PPBS-xx
Polarization Preserving Beam Sampler
The Polarization Preserving Beam Sampler (PPBS) uses a dual wedge design to sample a small percentage of a beam’s power for laser beam profiling applications.
Laser Beam Profiling and M² measurement
Filters
Accessory Type
Accessory Type
Sensor Area [mm]
Sensor Area [mm]
Type
Type
DAT-WinCamD-THz
Mutlispectral THz Camera
Laser Beam Profiler, which is ideally suited for multispectral THz laser beam analysis in the range of 3 THz to 20 THz.
DAT-BeamMAP
Multi Plane Scanning System BeamMap
Based on the patented multi plane scanning technology the scanning system the BeamMap allows the measurement of focal position, beam diameter (according to ISO 11146), divergence and the M2 factor of different focussed cw or qcw laser beams in real time.
DAT-BeamR2
BeamR, rot. Single Plane Scan
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm
DAT-BMR-LP
Lensplate for BeamMap2 and BeamR2
This adapter plate is also available for the Beam Profiler BeamMap and BeamR 1st generation.
DAT-Expander
Agrandisseur de faisceaux Laser
L'agrandisseur de faisceaux Laser est compatible avec l?ensemble des analyseurs de faisceaux Laser
DAT-M2DU-BR2
Banc de mesure automatique de M2
Le banc de mesure est compatible avec le système à balayage de fentes BeamR2
DAT-M2DU-BS
Banc de mesure automatique de M2
Le banc de mesure automatique de M2 est compatible avec le scanner linéaire BeamScope P8.
DAT-M2DU-WCD
Banc de mesure pour analyseur de
Le banc de mesure est compatible avec l?ensemble des analyseurs de faisceaux WinCamD
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
