NIR-ZSY-xxx
Laser adjustment goggle 532 nm, up to 100 mW
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 15 %.
Laser Safety Goggles
Filters
Test standard
- Adjust protection (EN 208)
Test standard
Filter Material
Filter Material
NIR-RA2-xxx
Laser adjustment goggle 630-660 nm, up to 100 mW
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 40 %.
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 26%.
NIR-DIA-xxx
Laser adjustment goggle 605-695 nm, up to 10 mW
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 39 %.
UNV-P1019-xxx
Laser adjustment goggle, 500-530 nm up to 100 mW
Laser safety goggles according to DIN EN 207 with polycarbonate filter and a daylight transmission of 22 %.
UNV-P1032-xxx
Laser adjustment goggle, 457-542 nm up to 10 W
Laser safety goggles according to DIN EN 207 with glass filter and a daylight transmission of 20 %.
UNV-P1043-5X7
Laser Safety Goggle RGB
Laser protection glasses according to DIN EN 207 with polycarbonate filter and a daylight transmission of 32 %.
NIR-AG2-xxx
Laser adjustment goggle 532 nm, up to 1 W
Laser adjustment goggles according to DIN EN 208 with polycarbonate filter and a daylight transmission of 47 %.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
