LMT-LBS-LIGHT
Mobile Laser Blocking Lightscreen
Mobile laser protection screen in lightweight design for flexible demarcation of class 3B and 4 laser systems.
Separation of Laser Areas
Filters
Type
- Compact spectrometer - Partition wall
Separation of Laser Areas
According to the German Ordinance on the Protection of Employees Against Hazards caused by Artificial Optical Radiation (OStrV), laser areas must be designed in such a way that the class 1 emission limit of the laser is not exceeded. This condition can, for example, be met by means of large-scale mechanical shielding made of tested and certified material. For this purpose, Laser 2000 offers laser safety curtains, manual or motorized roller blinds, fixed or roller-mounted screens, and screens for laboratory tables.
LMT-LBS-FLATFOOT
Mobile Blocking Screen Flatfoot
Mobile laser protection partition of flat foot construction for the delimitation of class 3B and 4 laser systems.
LMT-LBS-4
Laser Blocking Screen
All of the screens are portable and can be used as simple temporary installations or can be used on a semi-permanent or permanent basis as required.
STE-Quasar-TEC
Quasar Spectrometer: High-Throughput Raman Spectrometer
The Quasar Spectrometer is a high-performance Raman spectrometer series designed for ultimate sensitivity, speed, and ease of use. With a revolutionary f/2 optical design, Quasar spectrometers deliver 10x faster measurements, reduced noise, and improved detection limits.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
This Laser Beam Profiler from DataRay is equipped with a CQD sensor and offers a spectral response in the SWIR range of 400 - 1700 nm with resolutions up to 1920 x 1080 pixel.
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
