Separation of Laser Areas
According to the German Ordinance on the Protection of Employees Against Hazards caused by Artificial Optical Radiation (OStrV), laser areas must be designed in such a way that the class 1 emission limit of the laser is not exceeded. This condition can, for example, be met by means of large-scale mechanical shielding made of tested and certified material. For this purpose, Laser 2000 offers laser safety curtains, manual or motorized roller blinds, fixed or roller-mounted screens, and screens for laboratory tables.
Popular Products
DAT-WinCamD-LCM
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
Laser Beam Profiler WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
M2 Option for WinCamD
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.
