GPC-VDL-001
Manually Variable Optical Delay Line
General Photonics Manual Variable Optical Delay Line VDL-001 generates optical delays up to 600 ps (~18 cm).
GPC-VDL-001
General Photonics Manual Variable Optical Delay Line VDL-001 generates optical delays up to 600 ps (~18 cm).
GPC-FPS-001
GPC-TDC
Winding a large fiber spool is easy, but making compact, low loss fiber coils requires attention, precision, and skill.
GPC-MDL-003
GPC-MDL-002
GPCs' motorized variable optical delay line provides precision optical path length adjustment of up to 560 ps, single-pass. Driven by a DC motor with an integrated encoder, the MDL-002 has a resolution of less than 0.3μm (1 fs).
GPC-ODG-101
GPC-VDL-002
GPC-FPS-002
GPC-FPS-003
GPC-FGC
A suite of advanced polarization test instruments specially designed for testing the quality of fiber coils ensures the consistent production of high performance coils. GPCs' PM coils can be wound with different winding patterns such as quadrupole, octupole, or other types to minimize the Shupe effect, which degrades the performance of a fiber gyro under temperature-varying conditions.
DAT-WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
DAT-WinCamD-IRBB
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
DAT-WinCamD-QD-1550
DataRay's ILM system is used for beam profile monitoring of high power lasers consisting of an attenuator for high powers, an imaging lens system and a camera system. The measurement of very small laser beams with diameters of less than micrometers is possible despite often high laser powers.
DAT-M2DU
A main feature of the WinCamD is the optional M2 Stage. Thus, it can be easily extended to a complete M2 measurement system.